|
|
RunPager VS, Video Cam Security System
-
Version
1.03
Model 1 - No Wiring Necessary . . . This application uses your computer's video camera to monitor a room, hallway, small office, dormitory, or enclosed area and report motion violations of the secured area via pager and\or telephone call. It can set on an audio alarm through your speaker system as well as capture pictures of the motion causing the security breach. The program will also permit surveilance only operations, the collection of motion initiated pictures without setting an alarm trap. There are threshold and sensitivity adjustments to allow for light variations, total loss of light, and pet movements without causing an unwanted trip alert. Model 2 - Add Traditional Security Sensors . . . In addition to the video camera sensor, Model 2 senses actions of door\window dry contact magnetic switch closures, motion detectors, etc. via simple serial port interface connection. A stand-alone PC based security system, you just add readily available sensors. A minimum of wiring runs are needed when you use a motion detector to supervise large areas of coverage (e.g. 50x60 square feet). In addition you may opt to employ magnetic contact switches, or x-10 devices. No special connections required, uses any dry contact switch closure. Twelve zones of protection (four zones per comm port) with an unlimited number of switch devices on each zone. Simple two wire hookup of sensor devices to optional cable interface connector.
|