ipPulse - Version 1.82 ipPulse is a Connectivity and Device Status MonitoringTool. Use ipPulse to monitor the status of IP connecteddevices (computers) on any IP connected network.ipPulse uses a variety of methods, including ping, tcpconnects, and SNMP to poll and check the networkconnectivity of a list of user-defined nodes. ipPulsealerts you to failures using a variety of techniquesranging from audible messages to email and logging.Supports a large list of target hosts entered as eitherhostnames or IP addresses. The list can be importedfrom a text file. Polls the list on a cyclical basis with full controlover the list cycle timing parameters. Supports a primary and secondary test. Supports standard Ping ICMP Echo Requests/Replie.Primary test only. TCP Port numbers for TCP connect tests are assignableon a per-node basis. Primary or secondary test. Optionally uses SNMP v1 or SNMP v2c as a secondary testby requesting MIB2 OIDinterfaces.ifTable.ifEntry.ifOperStatus for everyinterface found on the target node. Community names areassignable on a per-node basis. Optional SNMP queries can be made for obtaining moreextensive data from the target host. ipPulse includes anumber of OID presets and 12 user defined OIDs.Example: you can obtain MAC addresses for everyinterface from an SNMP enabled host. Multiple alerts and logging. Alert options includebeeping your computer, playing a wave file, notifyingsomeone by email, or sending a notification email to acell phone. Logging options include logging all testresults to a text file, logging only errors to a textfile, or logging errors to a dynamically created HTMLpage. Any combination of logging options can be used.Alerts are issued upon failures using user-definedcriteria. Changes from a FAIL state to a PASS state cannow generate email messages.